how to clean

How to Clean a Glass Bong?

Posted on

If you want to have the best session with your bong, the trick is to keep it sparkling, shiny, and clean. A clean bong gives the best hit. Keeping it clean is very easy and very affordable. It only takes between 5-10 minutes to maintain even the dirtiest pieces with simple supplies. You only need to do it monthly.

Note that glass bongs have remained the most popular smoking accessories since they are easy to operate and clean. Leaving them dirty for a long time might give you a hard time scraping out the amount of resin that has stuck on it.

The glass bong or water pipe is the commonly used smoking device among people. It uses water to filter and cool smoke. The bong mounts a bowl on top of the downstem. This part helps direct the water via water located at the base, then to the neck, and through your mouthpiece.

To clean the bong, it's advisable to learn how it works. Otherwise, it won't be effortless for you to follow our comprehensive guide to maintain and clean it for smoke purity, optimal performance, visual appeal, and longevity. Let's delve into the cleaning process for smoke-lovers to have a great session: and get to know the apparatus that you will need for a sure quire before you start the process:

Here are some of the materials and ingredients during the cleaning process.

  • Towel or Dry Paper
  • Coarse sea salt
  • Huge zipper storage bags.
  • 99 % isopropyl alcohol and rubbing alcohol
  • Rubber stoppers or even bong plugs

Remove the downstem and bowl.


This is a step that most smoke lovers overlook. It should be the first thing that you are supposed to do. Carefully detach the downstem and bowl from your bong and insert them in separate storage bags. Place the bowl and the downstem in different bags and ensure they are safe enough not to break or get damaged.

In case the two are two pieces, it is advisable to detach them too. However, some glass bongs have more features attached to them. Guess what? You should disassemble them also. Make sure nothing is attached to it before you begin to clean it.

how to clean glass bong shake the plastic bag

Note that a thorough cleaning will involve shaking and scrubbing; therefore, separating every delicate part of your bong will help protect it from damage. After this, you can now clean them separately.

Note: You may need to put on latex gloves; the resin smell is intense and might be hard for you to get rid of.

Please put them in sealable storage bags containing alcohol.

Let's now focus on this time-honored tried and true cleaning method for most smoking apparatus. Using isopropyl alcohol leaves your glass bong in a great shape. You should use 70 % of the alcohol for light cleaning, but most smoke users will rely on either 91 % or 99 % isopropyl alcohol for heavy and true cleaning.

Pour your preferred amount of alcohol into every separate bag until they are fully submerged. Add a handful of the coarse sea salt. The salt knocks down the loose resin and debris on the side of your glass bong interior.

Keep in mind that alcohol is not safe if you are using an acrylic bong. It renders it useless. Therefore, any attempt to use it will dissolve all the adhesive that holds your bong, making it redundant.

And we are aware that this article is all about how to make glass bongs clean, but just in case you have an acrylic bong, you should keep in mind that you shouldn’t attempt to clean it with alcohol. The alcohol will alternatively dissolve any adhesive that holds the bong together, and it will render it unusable.

The Guide to Salt Cleaning Method

Most bong users swear by the cleaning power of the salt. They say it's a quick-fire cleaning:

Step 1. Pour a few tablespoons of salt into your glass bong through the mouthpiece. Note that the coarser your salt is, the better.

How to Clean Glass Bong Step1

Step 2. Fill the bong with lukewarm water until it gets beneath the bong shaft line.

How to Clean Glass Bong Step2

Step 3. Cover the mouthpiece and shaft hole and begin shaking your glass piece. Do that for some minutes.

How to Clean Glass Bong Step3

Step 4. You can now drain the dirty water inside your bong.

How to Clean Glass Bong Step4

Step 5. Continue rinsing the glass with warm water and salt until you feel it is thoroughly cleaned. At this point, rinse it until the taste of salt disappears.

How to Clean Glass Bong Step5

Besides alcohol, salt, vinegar, etc., more bong cleaners in the market are used to clean your glass bong. Such as BIG CHIEF and FORMULA 420 bong cleaner, which is the original complete 1-minute cleaner.  Simply shake and rinse!

However, any recommendable chemical cleaner that you use ensures to shake it properly. If combined with salt, they work best. With the chemical solution plus salt in your glass bong, shake it okay for a few minutes, and rinse thoroughly after cleaning.

Shake the solution up!

How to clean glass bong shake the solution up

Cover all the openings of your bong using either your hands or a stopper. The shaking part is fun. Do it as hard and as long as you can. The longer time you take, the better. As you shake, you will realize the resin buildup is starting to dissipate miraculously; however, some resin remains unshaken even after a thorough shake. Don't fret; the next step will be sure to dot the i's and crosses the t's.

Let them soak.

As mentioned earlier, use an adequate amount of cleaning solution that submerges the entire part. The right amount of alcohol and salt is determined by the form factor and size of your glass. For the rule of thumb, fill the glass up with the alcohol to a consistent level with the bong water line. You can also use some cotton balls, a stopper, or a cork to plug any available opening to avoid messing up in the next step.

You can leave the parts to soak to allow the solution to work magic. The longer it soaks, the better results you get. But if you are impatient, ten minutes are appropriate in the solution.

Remember that the longer you allow them to soak, the faster and easier the residue trickles down to simplify cleaning. If the glass bong is intensively dirty, a thirty-minute soak is effective. It softens the resin buildup for easier cleaning.

Pro Tip: adding a dash of vinegar to your solution increases the acidity, making the cleaning solution dissolve more and work faster. It removes even the hard water stains.

Wipe them down.

After soaking and soaking the few pieces of your glass bong, kindly pour out the solution. Before rinsing with clean water, you can now use a rag to wipe out the potent cleaning agent. You get to capitalize on the solution since it's still powerful and can be reused.

You can pick a paper towel and stick your hands inside to wipe any remaining grime for the parts that have bigger openings. The more elongated openings call for a drumstick with a towel draped around it to go in and smudge all the buildups.

For those bongs with smaller openings, especially the smaller pieces such as pipes, you can use a pipe cleaner or any other tools that can get inside the bong and scoop every resin. Just improvise, don't overthink it.

After you are done clearing the grime out of your glass bong, you can pick up other detached pieces of your bong that have soaking. However, a tremendous amount of the grime will only be dissipated after a very long soak. For now, let's use a cotton swab or rag to clean it.

Before we get done with this stem, your bong is supposed to be clean and polished. Otherwise, it is advisable that rinsing will help pretty much before keeping the glass bong back to the shelf in case of some residue smears.

Rinse out the pieces in hot water.

After soaking, get running hot water to wash off the cleaning solution. It helps dislodge some resin buildup before the cleaning process. Ensure the water is boiling and put on gloves to protect your hands.

Rinsing using hot water loosens up the buildups that might be clogged on your bong. Also, the tongs might be helpful to grip the bong parts securely. However, if you use hot water on a cold piece, it might shatter. It's safer to start with some lukewarm water if your piece is cold and gradually raise its temperatures.

If it's a smaller routine cleaning, rinse the glass bong very fast and hop into the next step. Use pipe cleaners or cotton swabs to knock off the large resin.

In case there are chunks of resin or tar that you can reach, you can use the cotton swabs to knock them off. If it resists, you shouldn't worry since you want to remove the bigger ones. You can quickly get rid of the smaller chunks by freezing the glass bong for about 30 minutes. Freezing loosens up the fragments. Make sure the bong is dry before freezing it.

After clearing the resin from the glass bong and other parts:

  • Rinse off using warm water.
  • Shake it lightly or gently to remove any remaining wax.
  • Do not reassemble your bong without rinsing it thoroughly to ensure no smell is left.

        It is advisable to learn how to get rid of resin from the glass bong. If it remains, its taste overpowers the flavors of the sweet terpene in your flavor. A considerable number of smokers understand how to clean and save some resin for the next session. These leftovers can get you better experience, and since herb has become so expensive nowadays, every little experience matters a lot.


        Of course, I didn't have to add this last step, but the feeling and experience of using a clean bong are too fancy and magnificent not to include it. The reason we clean the bong is to smoke from a freshly cleaned device. It's time to take advantage of making use of your newly neat piece.

        Time to fill your bong chamber with fresh cold water and put some terpenes to have a delightful hit that comes once every few weeks. With a clean bong, you'll not strain to have that specific flavor; it's time to tap your herbs, experience it at your purest.

        The Cleaning Process a Silicone Bong

        Silicone Bong

        It's shocking how easy cleaning a silicone bong is. Unlike glassware that is delicate and you have to be extra cautious when cleaning it, silicone is remarkably effortless; you need a dishwasher to have it clean.

        The silicone bongs are small, light, and are long-lasting. Here, you don't have to break the bank to purchase alcohol. You can easily dislodge the chunks of resin using a dishwasher. This is so because they are unbreakable.

        You don't have a dishwasher. Don't worry; below are a few other methods that can guide you on how to clean your silicone bong:

        • Freezing: Silicone bongs are resilient against cold and heat. Place the dirty piece in a freezer for several hours. After removing the bong out, crush it and get rid of the frozen bits. This will get rid of every solid material attached to it. However, the flower smokers might still feel the tar smell.
        • Alcohol: This type of bong doesn't react to polar solvents such as alcohol. Fill your silicone bong with some warm or cold drinking. A warm drink works best here. You can immerse the silicone in the alcohol cleaning solution overnight. Rinse it thoroughly with water.
        • Plant-Based Cleaners: Some cleaning solutions have Vitamin E and coconut oil. They work the same as alcohol.


        In this article, we have fed you with a self-explanatory process that will help you clean the bong to extend the life of both the silicone and glass bong. Note that the more cleaning you do, the easier the cleaning process gets. Therefore, get those bongs that are now on sale and follow this step. It maintains and gives the device a long-life span.

        A clean and fresh glass hits differently. The smoking experience is more pleasurable, and nothing beats the first hit from a cleaned piece. You can as well apply this method to dabbers, nails, dab rigs, etc.

        Read more →

        What is A Dab Rig and How to Dab?

        Posted on

        Dab rigs take concentrates to the next level. A powerful and exciting method of using concentrates, dabbing, delivers the most mind-blowing effects. It is the purest method of imbibing these delicate, high-quality, and expensive concoctions.

        What is a Dab Rig?

        Swiss Fab Egg Dab Rig

        A dab rig delivers so much in terms of purity and intensity. It's a glass device with a combination of tools and accessories designed to vaporize concentrates. Just like bongs, dab rigs filters vapor through the water at its base. However, dab rigs are small than the bongs, providing less drag, so the smoke moves to the lungs in a quick manner and retains more potency. Dab rigs are not for beginners; they are best in the hands of legends who appreciate the strong, streamlined effects and heavy flavors that the extract and dab rigs provide. There are several components required to use dab rigs and pipes. Herein are the materials that are required to use a dab;


        It's a device that is used for the consumption of concentrates. Most of these rigs are made up of a glass water pipe that vaporizes concentrate. Dab rigs and bongs are considered rigs. The rig connects to a nail or bowl.

        Dab Nail:

        It is an element of heating that is attached to a rig. It's made out of glass, ceramic, quartz, and titanium. Each material has its own unique set of slightly different qualities that help them retain heat for a given period. The longer the retention, the better. There are different types of dab nails whose heating temperatures vary differently.

        Quartz Nail

        It heats up very quickly; however, it has very less heat retention. This allows the dabbers to get to ideal temperatures quicker and enjoy their terpenes' true flavors. It never gives off harmful gasses since it's the type that heats up fast.

        • Electric Nail:

        Enail Kit

        Unlike quartz nail, it's the most expensive nail. E-nail is an element of heating that is powered by an electric current. It has a box controller that drives the electricity flow to a coil, which then heats the nail. For electric nail, you don't have to wait for temperatures to cool off to load concentrate on the nail; it regulates its own heat to desirable good temperatures.

        Dabber(Dab Wand):


        A Dabber(also known as Dab Wand) is a must have dab tool for every dab lover. There are variety of types of dabbers in the market now. Stainless steel, titanium, quartz and glass are the most commonly used materials. Choosing which dabber is usually determined by the concentrates that you intend to use.

        Dab Wax:

        Dab Wax

        This is the concentration that is added to a dab rig for vaporization to take place. It is a dose of concentrate of half-size a grain of rice put in a banger and vaporized for inhaling.

        Dab Container:

        Concentrate Container

        They are nonstick containers made of either silicone or glass and can be used for storage containers for wax. They are accessories used by anyone who is regularly dabbing, and it is already known that waxy buildups can plague incorrect storage space.

        Carb Cap:

        Carb CapIt's like a lid; it covers your dab as it vaporizes. A carb cap traps heat and allows you to have a long time for your dab session before it needs to be heated again. It lets you dab at lower temperatures; high temperatures interfere with the terpene's concentrate flavors, to the extent of burning the extract.

        Quartz Insert:

        Quartz Insert

        They are bucket-shaped containers that are loaded with concentrate and placed inside a banger. They are made to fit in a banger. The insert creates a thick barrier of the quartz between your banger's bottom side, concentrates on the direct heat, and helps with temperature control. With this barrier in place, your concentrates are well vaporized by induction instead of the direct-contact heat. In fact, you can try and skip your 'cool-down' time at once and place the insert inside your banger right after hitting it up a torch and still get a super low-temperature dab.

        Terp Pearls:

        Terp PearlsThey are tiny pearl-like balls that assist you in achieving low-temperature dabs that preserve terpenes. The goal is to achieve lower-temperature dabs; terp pearls are a hit. With terp pearls, dabbers will experience less "puddles" and more flavorful hits. There will be no room for burning high-quality concentrate.


        Butane Torch

        Unlike E-nail that uses electric current, a torch is used to heat a traditional nail to the desired temperatures. The torch heats the nail that vaporizes the concoction for dabbers to inhale and feel a lot of goodness.

        How Does A Dab Rig Work?

        Dabbing offers powerful experience and a flavor-packed experience. Heat is not directly applied to the concentrate. Dab rigs vaporize the concentrates without the need for combustion. By heating its nail for a given period of time, a hot surface glows, turning the concentrate on the nail into vapor. As you inhale, the vapor is drawn from the water chamber to your lungs.

        A Step-by-Step Procedure of Dabbing

        Step 1

        Secure your nail to the dab rig. It is absolutely very crucial. Ensure it is well-positioned and fastened to avoid wobbling before you heat it up.

        Step 2

        After heating the nail fully using a heating element, it is advisable to heat the nail uniformly until you notice a reddish glow on the hot nail. Depending on the nail's thickness and your torch's power, heat your nail for 30 seconds. Some nails have materials that heat quickly while others are slow on heat. If you are using a quartz nail or banger, heat it until it turns red.

        Ensure the nail is not so hot to burn the extract but hot enough to vaporize the concentrate immediately; it lands on the nail. It's a delicate balance, which is why an electric nail can work best since its heat is always under control. It might be expensive but worthwhile.

        Step 3

        Let the nail cool down. The amount of time you need depends on the thickness and material of your nail or banger. However, a general rule is to let your nail cool twice as long as it took to heat it. The nail retains its heat after torching, therefore, be cautious not to burn your skin. Low-temperature dabs have very high flavor but smooth on the lungs.

        They give a good hit to veterans when inhaling. If using an electric nail, you don't have to wait for it to cool down. The current will heat the nail to the precise temperature you tell it to. Your nail's target temperature should be around 300-450 degrees Fahrenheit (149-232 degrees Celsius) to get the most flavor out of your concentrates!

        Step 4

        After the heat is lowered, using a dabber, place as much concentrate as you want on the dab's rig hot nail. When you heat properly, the concentrate evaporates very fast. Place your mouth slowly on the dab rig, and calmly start to inhale the vapor. Don't be quick to inhale. Else you will choke and mess with your throat or even the lungs, be slow on the concentrate.

        In case you cough, the heat on the nail might still be hot; allow it to cool off. Place a carb cap on the banger to vaporize the dab better while inhaling. The cap should be airtight until all the extract has evaporated. It traps all the heat to ensure you get a breathtaking experience. To clear all the vapor out of the rig, lift the cap for air to escape. You start experiencing the impact of the dab within seconds after exhaling.

        Step 5

        Once finished inhaling, ensure to clean your nail. During dabbing, toxins collect on the nail. Therefore, always keep the nail clean to avoid the residue from changing the flavor when having another session of dabbing. First, allow the nail to cool down a bit, then use a cotton dipped in alcohol to wipe the inside of the warm nail and clean away excess residual from the nail. Besides, cleaning the nail makes your dab rig last for a long period of time.

        How to dab without a rig?

        Dab rigs are really fun and efficient; however, they are not the only tools that one can use to consume concentrate. Some ways are more convenient if you do not want to attract a public eye. While others are cost-effective. Whatever the reason, it is worth the effort to learn more than one method of smoking dabs.

        (1) Use a Nectar Collector to Dab

        Nectar Collector

        A nectar collector also called a dab straw, does not waste any wax. Nectar collectors are becoming increasingly more common. A nectar collector is an elementary device that is generally very easy to use and easy to clean. To use a nectar collector, you will need a dab mat and a torch. After you place the extract in a glass, heat the nectar collector's tip with a torch until it's reddish.

        Allow the device to cool off, place your mouth, and then inhale gently from the sector's cool side. There are also electric nectar collectors that make torches completely unnecessary to carry.

        (2) Water Bong or Bubbler

        Water Bong

        A bong is not as complex as a dab rig. It's a simple filtration device with a bowl, carb, stem, base, and tube. First, you put water in the bong. Then load the bowl with a concentrate. Light up the bowl as you inhale gently. The smoke is filtered through the water for a smooth hit.

        (3) Wax Vaporizers

        Wax Vaporizer

        Wax vaporizers come with all that you need to get started, including a cleaning brush. They are specifically designed with the products of wax in mind. The vape pens use the lithium-ion as well as batteries of the lithium-polymer and durable waxy chambers to heat wax products consistent until the production of vapor.

        (4) Dab Pen

        Dab Pen

        Dab pen, also called a wax pen, is a pen-style vaporizer for concentrate called wax. They have rechargeable batteries attached to them; hard-hitting ones use coils while others use ceramic coil-less heating system geared towards vapor. Remove the cap to access the coil and load the dab directly into the heating chambers. However, ensure the device is charged and turned on to hold the fire button down while inhaling. A dab pen is easier to use than a dab rig.

        How to clean a dab rig?

        You will need the following substances to clean and leave the components of your dab rig sparkling clean:

        • 99% isopropyl alcohol (rubbing alcohol)
        • Water
        • Sea salt
        • A sealable plastic bag
        • Cotton swab

        Step 1:

        Torch Your Nail

        When you torch your nail, you get rid of the combustion that can clog your nail. If the carbon burns remain on the nail, the flavor in the concentrate changes as well. Torching will allow the build up of residual to burn off completely to prepare the dab rig for the next round. However, you can still soak a cotton swab in alcohol and clean your nail's surface to get rid of the residues completely.

        Step 2:

        Detach the nail, soak it in alcohol.

        Dabbing repeatedly causes the nail to have buildups. In case you touch, and still, the pin isn't clean enough, soak the nail in a container filled with alcohol then seal it. You can add salt and often shake the bag to remove the residue.

        Step 3 :

        Drain the water from your dab rig.

        It is advisable to change the water in your rig daily. Especially if you use your rig more often, drain the old water in a sink. This helps prevent the residues and ensure the flavor and purity of the vapor is a bit top-notch.

        Step 4:

        Add alcohol to the rig

        The bottom of your rig might have buildups too after heating. Fill it with alcohol. For deeper clean, add some sea salt until it covers the bottom part.

        Step 5:

        Shake your rig.

        You cover all the openings of your rig. You can use your hands or fitting caps then shake your rig well to dissolve the build ups around it.

        Step 6:

        Rinse the rig and nail.

        After shaking and clearing the build-ups from your rig and nail, rinse them well

        Using warm water. Keep shaking the rig as you rinse to wash off the remaining residue as required.

        Read more →

        How To Use A Nectar Collector

        Posted on

        Nectar Collectors are the newest trend that is becoming quite popular amongst people for smoking. This latest dabbing trend is something that I cannot get enough of. If you are passionate about dabbing, a nectar collector is one of the essentials that you need. It is a highly convenient tool that will surely become your new favorite way to dab. Continue reading to know all about nectar collectors.

        How To Use A Nectar Collector

        What is a Nectar Collector?

        A nectar collector is the latest trend in the world of dabbing. With a straight tube design, using a nectar collector looks like using a straw to drink. So, what are nectar collectors used for? These help in smoking oils and waxes.

        A nectar collector has a neck, body, and a tip. The materials that are most commonly used to make nectar collectors are glass and silicone. For the tips, usually, titanium, quartz, or ceramic are used.

        The nectar collector also has a mouthpiece that is used to inhale the smoke. The mouthpiece is removable, which means, you can easily clean it without any hassle. This also makes the nectar collector great for carrying around with you.

        The main body of the nectar collector is right at the center of it. It also consists of a percolator, which is used to cool down and filter the smoke. Every nectar collector comes with a filtration system whose main job is to filter the smoke.

        Types of Nectar Collectors

        By Material:

        Silicone Nectar Collector

        Silicone Nectar Collector


        The first type of nectar collector is a silicone nectar collector. It is made of silicone components and has a glass chamber that is pretty strong. What makes a silicone nectar collector a great option? It can easily be stored in the freezer without causing any damage to the collector. This helps cool down the vapor so that it does not irritate your throat when you sit down to smoke it.

        Another benefit of a silicone collector is that it does not break easily, making it the most durable and long-lasting. You can travel easily with it without worrying about seeing the shattered pieces.

        This impressive nectar collector has six-armed tree perc in its chamber. You need to add water to this chamber to cool down your dabs. It also works as a filtration system. It also comes with angular edges that make sure the collector does not slip from the table. Also, it is extremely easy to clean this collector as every part is detachable.

        Glass Nectar Collector

        Glass Nectar Collector

        Glass nectar collectors are highly common since glass does not affect the flavor of the vapor. What does this mean? It simply means that when you are smoking, you get pure vapor that does not interact with any molecules when it makes its way up. So, you can enjoy the original flavor of your vapor without any chemical flavors mixed with it.

        The neck of this collector is detachable, making it easy to clean and take care of. It is also quite easy to assemble this glass nectar collector.

        Wood Nectar Collector

        Wood Nectar Collector

        This is a nectar collector with a glass tip and wooden sleeve. It is one of the best ways to enjoy waxy concentrates. It is also quite easy to use it. Simply heat up the glass tip and dip into your waxy oil concentrates to enjoy it.  

        It is made using high-quality materials. It makes use of high quality glass for the tip and cherry hardwood for the body. It also contains neodymium magnets. Also, the thing that makes this nectar collector so special is the fact that you can pocket it after using without worrying about the tip being hot. Why? The wooden sleeve covers up the hot tip. This is your new go-to product.

        Electronic Metal Nectar Collector

        Electronic Metal Nectar Collector

        The Electronic Nectar Collector has been the rage amongst people for some time now. This collector is also known as a honey straw that makes vaping concentrates quite an easy and enjoyable task. It is quite a handy and portable product that can be carried around everywhere and can be used with ease. You can carry this on the go for your instant vaping sessions. 

        By Water Filter:

        Nectar Collector with Water Filter

        Nectar Collector With Water Filter

        Are you looking for the perfect nectar collector to become a part of your collection? This is the ultimate one that you should go for. The slim and cool nectar collector is made of silicone and comes with a center glass chamber. It also contains a silicone storage container. This nectar collector with a water filter can be used in dual ways.

        You can use this nectar collector like you would use others, by dipping it in your concentrates and getting the full flavor out of it. However, if you use the sweeping neck attachment that comes with it, you can instantly transform it into a portable water pipe for your herbs and flowers.

        Nectar Collector without Water Filter

        Nectar Collector Without Water Filter

        This is a highly convenient and easy-to-use nectar collector that is also very portable and durable. It has a body that is made of silicone, which means, that it will last you a long time without breaking. The titanium tip is also made extremely well. It is compact, making it easy to travel with. Also, the silicone cap that comes along with the collector ensures that you can use it whenever and wherever without worrying about the heated tip. I am sure you will love this handy gadget, especially when you are out and about.

        How To Use A Nectar Collector?

        The nectar collector has three main components:

        • Neck
        • Body
        • Tip

        The neck is basically the mouthpiece from where you take in the vapors. Between the neck and the tip lies the body, which works as a water chamber. Adding water to the chamber is completely up to you. So, you can use your nectar collector both dry and wet.

        Adding water is a good idea as it filters out the smoke. The tip is the real place where the vaping action happens.

        It is quite easy to assemble all these parts and use a nectar collector easily. I have broken down the process so you can easily follow it up -

        Step 1:

        Use any concentrate of your choice - wax, shatter, rosin, or oil - and take a little amount in the quartz dish. I personally love using oil as it means less wastage and more flavor. Do not dab straight from the jar that comes with the cannabic concentrates. This is because the tip of the nectar collector is too hot. Its contact with the plastic jar can generate toxic fumes that are not good for your throat and lungs. However, if the jars are made from food-grade silicone, it is okay to dab with them as silicone is heat-resistant.

        Step 2:

        You can add water to the chamber of your nectar collector to filter the smoke. It also helps cool down the temperature, making it optimal for when you are smoking. You can also dab without the water. Adding water makes the vapor clean for you so that it does not affect your lungs or burn your throat.

        Step 3:

        Now comes the time for the tip. There are types of tips available. Tips can be made of quartz or titanium and choosing which one to use is up to you. Quartz tips give you a purer taste when dabbing, however, it takes longer to heat up than a titanium tip.

        You need to put together the tip and the mouthpiece and secure them with a set of clips. Securing is quite an essential step as this protects your hands or lap from the hot drops. These clips that are used to secure the two pieces together are designed to withstand extreme heat.

        Step 4:

        Next, you need to heat up your tab to the desired temperature. You can use a butane torch to evenly heat up the tip by moving the flame all around. Do not keep the flame only on one particular part of the tip as this could heat it up to hazardous levels. The high temperature can also lead the glass to break. To know if your nectar collected is heated enough, curl your palm a little and put it at a fist’s distance from the tip. If you can feel the heat radiating from it, then it is ready for dabbing.

        Step 5:

        When your tip is heated enough, place it on the quartz dish that contains your concentrates. The heat of the tip will vaporize the concentrates. Use the mouthpiece to inhale the vapor. If you have added water, it will help cool down the vapor and make it optimal for inhaling.

        If there is no vapor coming, it means that your tip is not hot enough. Remove it from the concentrates and let it cool down. Then, use a tissue to clean the tip and then reheat it.

        Just remember never to heat the tip with the concentrates in it. It chars it and makes it impossible to clean it.

        How To Clean A Nectar Collector

        How to clean silicone or glass nectar collector?

        We have post a blog about "How to Clean a Silicone Nectar Collector". The way to clean the glass nectar collectors is same as silicone. I have laid down the steps that you can follow to clean up your collector:

        Step 1:

        First, disassemble your nectar collector. Doing this will show you exactly how dirty it is.

        Step 2:

        Next, you need to create a cleaning solution. For this, you can use Isopropyl alcohol and salt. Mix them together in bags or containers. You can also add some salt in the hard to reach areas to loosen up the resin and get the best results.

        Step 3:

        You now need to soak your nectar collector in the cleaning solution. If you have time, you can leave it in the solution overnight. However, anywhere between 30 to 60 minutes can do the trick.

        Step 4:

        Once you have let the collector sit in the cleaning solution, the next step is to rinse it in room temperature water. You may need to use Q-tips and pipe cleaners to fight the tough resins.

        Step 5:

        If you need your nectar collector to be completely clean, you may have to use a pipe cleaner or Q-tip. This is the best way to go through the tough areas.

        Step 6:

        Now, rinse off your nectar collector for two minutes. This is the best way to ensure that all alcohol from the solution is rubbed off. Once rinsing is done, you need to completely let your collector dry as water can damage it if you smoke with it in the chamber.

        Step 7:

        Finally, it is time for reassembling all the pieces back together. Make sure everything is clean and dry. You are now ready to use your clean silicone or glass nectar collector.

        How to clean electric nectar collector?

        Just like silicone or glass nectar collectors, cleaning an electric collector is also quite easy. Here are the steps that you can follow:

        Step 1:

        First, remove the tip of your electric nectar collector. Then, blow through the mouthpiece to get all the water out of it.

        Step 2:

        Next, choose a cleaning solution. If unsure about what to use, you can use alcohol. Fill the chamber with it. Let it soak for up to an hour. However, you can leave it overnight if it is too dirty.

        Step 3:

        The tip needs to be soaked up separately in a ziplock bag.

        Step 4:

        When you are done soaking the nectar collector, rinse the pieces with hot water until the water runs clear. Make sure there is no alcohol or cleaning solution left on the collector.

        Step 5:

        Dry it completely before using.


        If you are into dabbing, a nectar collector is a great thing to include in your collection. It is compact and durable. Also, there are so many variants that you can choose from - whether you want one that is made of glass or an electronic one, each one of them will give you a feeling of bliss and joy. If you want to follow trends and want a gadget that makes dabbing an easy and enjoyable task, you must get a nectar collector for yourself.


        More Articles
        1. How to Clean a Silicone Nectar Collector?
        2. Dabbing Guide: What's a Dab Mat?
        3. How to Choose a Right Nectar Collector for Dabs?

        Read more →

        How to Clean a Silicone Nectar Collector?

        Posted on

        You know that nectar collectors are some of the best equipment to use if you enjoy smoking dabs. However, once in a while, like every other equipment, your nectar collector needs some cleaning.

        A nectar collector is small. It has a complicated shape, and features multiple parts that make it challenging to clean. If you struggle knowing how best to go about cleaning your nectar collector guide, worry no more as we are here to show how to go about the cleaning. Therefore, sit back and read through our nectar collector cleaning guide.

        Nectar Collector Dab Kit

        Is There a Recommended Way to Clean a Nectar Collector? 

        If you own a nectar collector, you are probably wondering, what is the best way to clean your equipment. The most recommended way is using a cleaning solution that is salt-based and contains Isopropyl alcohol. Pour the solution into a container then soak each part of your portable rig for thirty to sixty minutes. 

        After the soaking time is up, rinse the pieces to examine how clean the soak has left them. You may find some parts are dirtier, and they need a longer time to soak. You could also use cleaning tools like Q-tips and pipe cleaners to get the stubborn dirt out of your nectar collector. Before you sue your nectar collector again, ensure you rinse off all the pieces and dry them completely once they are clean. 

        If you own a glass nectar collector, you also can use a torch to clean it and save reclaim. You can see the YouTube video "How to clean your dab straw / nectar collector and save your reclaim". 

        But you can find few articles and videos to tell you how to clean the silicone nectar collector. Do you know how to clean the silicone nectar collector? Cleaning a silicone nectar collector is just as easy as using it. Read along to know the steps of cleaning silicone nectar collector.

        What Supplies Will You Require to Clean a Silicone Nectar Collector?  

        Before you begin cleaning your nectar collector, you need the necessary supplies to do the job. You do not want to start cleaning only to find there are supplies lacking and you cannot complete the process in one day. Preparation is vital when it comes to nectar collector cleaning. 

        Cleaning Tools

        Here are the supplies you require:

        • Sea Salt
        • Running water
        • Isopropyl alcohol – To get the best result, one whose concentration is 91 or higher.
        • Pipe cleaners
        • Plastic containers
        • Q-Tip
        • Paper towels

        These products are easy to find, making the cleaning process easy.

        Steps to Follow When Cleaning a Nectar Collector

        To properly clean your rig, here are the steps you should follow:

        1. Separate the pieces of your nectar collector kit

          The first step you take when cleaning your dab kit is taking apart the pieces of your nectar collector. Separating the parts allows you to see how dirty inside and keep the pieces from damaging as when you start cleaning them.

          Note that cleaning the nail of your nectar collector is different compared to the other pieces. That is important. We will give you a guide on how to clean this piece.

          2. Fill containers with your cleaning solution

          The second step is your cleaning solution. Take your Isopropyl alcohol then pour it into the containers or bag you are using for cleaning. Add salt to the solution and lightly stir it to mix the two supplies. 

          To obtain the best results, pour a bit of the salt through the holes and in places where are difficult to reach during cleaning. Salt will help in loosening up some of the resin that is stack in your rig.

          3. Soak the silicone nectar collector

          Step three is soaking your dab kit for at least 30 to 60 minutes. The 30 to 60 timeframe is not compulsory as you can soak your equipment for a shorter period; however, this time frame is the one that provides you with the best results. If you can soak your pieces overnight, that’s even better.

          Soaking your silicone nectar collector dab kit does a good job of getting rid of stubborn build in resin, leaving your rig as good as new. Do not skip step three.

          4. Rinse off the solution

          After soaking your pieces, it’s time to rinse them off so that you can see how clean they are. Rinsing off the solution allows you to assess how much cleaning the soaking did on the equipment. The water you use for rinsing should be room temperature.

          The temperature of the water is crucial since your quartz and glass could break, fracture or became fragile if the rig experiences fast temperature changes. There are times where you’ll need to use the Q-tip and pipe cleaner to remove excess resin that wasn’t cleared out by the solution.

          If you encounter excess resin, clean it off by rinsing it with water or soaking it in the solution once more while scrubbing the device to obtain the best results.

          5. Get rid of tough spots using pipe cleaners

          If you want precision when cleaning your dab kit, use the Q-Tip and pipe cleaners to get rid of excess particulate and resin that are still hanging on to your equipment. Make sure you are gentle when using pipe cleaners and the Q-Tips.

          However, you don’t need to bother yourself with cleaning every inch of your piece to enjoy the cleaning process benefits. We don’t mean you avoid being thorough; however, don’t overthink the cleaning process. You also want to enjoy the process and not stress about it.

          6. Rinse with water then let the rig dry

          Once you are done soaking your device, ensure you use water to rinse out the solution for at least two minutes. Rinsing out your piece helps in removing any particulate that is remaining on the rig. Water also gets rid of all the alcohol.

          It’s vital you thoroughly rinse your piece with water to avoid inhaling alcohol fumes. These fumes are dangerous to your health, and the last thing we want is for you to fall ill when enjoying a dabbing session.

          Once you finish rinsing your nectar collector dab kit, let it dry out. Allowing your piece to dry is vital since water can damage your nectar if you smoke when there’s some water in the chamber. Water can also harm you when it’s not dried off completely.

          7. Put your equipment back together

          Now that your nectar collector is all clean and dry, it’s time to put it back together and enjoy your dabbing sessions.

          8. Cleaning your nectar collector nails

          Remember, we said that the steps of cleaning the nail are different from the other pieces. How you clean your nail depends on the it’s type. If your nectar collector has a titanium tip, your cleaning options are very minimal since most cleaning solutions break down the outer coating that protects the titanium tip. 

          Titanium tips, therefore, force you to use cleaning ways that are more natural or you burn them clean. If your nectar collector has ceramic or quartz tips, cleaning solutions will work just fine on them. 

          How Often Should We Clean the Silicone Nectar Collector? 

          You should try to clean your nectar collector at least every 3 to 6 months to prevent mold spores and bacteria from growing. Cleaning your nectar collector also contributes to its durability, and the cleaner your dab straw is, the longer it will last. 

            That’s it -The process of cleaning a nectar collector. You can now go back to enjoy clean, dabbing sessions.

            Read more →