How to Clean a Silicone Nectar Collector

How to Clean a Silicone Nectar Collector?

Posted by INHALCO Editorial Team on

You know that nectar collectors are some of the best equipment to use if you enjoy smoking dabs. However, once in a while, like every other equipment, your nectar collector needs some cleaning.

A nectar collector is small. It has a complicated shape, and features multiple parts that make it challenging to clean. If you struggle knowing how best to go about cleaning your nectar collector guide, worry no more as we are here to show how to go about the cleaning. Therefore, sit back and read through our nectar collector cleaning guide.

Nectar Collector Dab Kit

Is There a Recommended Way to Clean a Nectar Collector? 

If you own a nectar collector, you are probably wondering, what is the best way to clean your equipment. The most recommended way is using a cleaning solution that is salt-based and contains Isopropyl alcohol. Pour the solution into a container then soak each part of your portable rig for thirty to sixty minutes. 

After the soaking time is up, rinse the pieces to examine how clean the soak has left them. You may find some parts are dirtier, and they need a longer time to soak. You could also use cleaning tools like Q-tips and pipe cleaners to get the stubborn dirt out of your nectar collector. Before you sue your nectar collector again, ensure you rinse off all the pieces and dry them completely once they are clean. 

If you own a glass nectar collector, you also can use a torch to clean it and save reclaim. You can see the YouTube video "How to clean your dab straw / nectar collector and save your reclaim". 

But you can find few articles and videos to tell you how to clean the silicone nectar collector. Do you know how to clean the silicone nectar collector? Cleaning a silicone nectar collector is just as easy as using it. Read along to know the steps of cleaning silicone nectar collector.

What Supplies Will You Require to Clean a Silicone Nectar Collector?  

Before you begin cleaning your nectar collector, you need the necessary supplies to do the job. You do not want to start cleaning only to find there are supplies lacking and you cannot complete the process in one day. Preparation is vital when it comes to nectar collector cleaning. 

How to Clean a Silicone Nectar Collector

Here are the supplies you require:

  • Sea Salt
  • Running water
  • Isopropyl alcohol – To get the best result, one whose concentration is 91% or higher.
  • Pipe cleaners
  • Plastic containers
  • Q-Tip
  • Paper towels

These products are easy to find, making the cleaning process easy.

Steps to Follow When Cleaning a Nectar Collector

To properly clean your rig, here are the steps you should follow:

1. Separate the pieces of your nectar collector kit

    The first step you take when cleaning your dab kit is taking apart the pieces of your nectar collector. Separating the parts allows you to see how dirty inside and keep the pieces from damaging as when you start cleaning them.

    Note that cleaning the nail of your nectar collector is different compared to the other pieces. That is important. We will give you a guide on how to clean this piece.

    2. Fill containers with your cleaning solution

    The second step is your cleaning solution. Take your Isopropyl alcohol then pour it into the containers or bag you are using for cleaning. Add salt to the solution and lightly stir it to mix the two supplies. 

    To obtain the best results, pour a bit of the salt through the holes and in places where are difficult to reach during cleaning. Salt will help in loosening up some of the resin that is stack in your rig.

    3. Soak the silicone nectar collector

    Step three is soaking your dab kit for at least 30 to 60 minutes. The 30 to 60 timeframe is not compulsory as you can soak your equipment for a shorter period; however, this time frame is the one that provides you with the best results. If you can soak your pieces overnight, that’s even better.

    Soaking your silicone nectar collector dab kit does a good job of getting rid of stubborn build in resin, leaving your rig as good as new. Do not skip step three.

    4. Rinse off the solution

    After soaking your pieces, it’s time to rinse them off so that you can see how clean they are. Rinsing off the solution allows you to assess how much cleaning the soaking did on the equipment. The water you use for rinsing should be room temperature.

    The temperature of the water is crucial since your quartz and glass could break, fracture or became fragile if the rig experiences fast temperature changes. There are times where you’ll need to use the Q-tip and pipe cleaner to remove excess resin that wasn’t cleared out by the solution.

    If you encounter excess resin, clean it off by rinsing it with water or soaking it in the solution once more while scrubbing the device to obtain the best results.

    5. Get rid of tough spots using pipe cleaners

    If you want precision when cleaning your dab kit, use the Q-Tip and pipe cleaners to get rid of excess particulate and resin that are still hanging on to your equipment. Make sure you are gentle when using pipe cleaners and the Q-Tips.

    However, you don’t need to bother yourself with cleaning every inch of your piece to enjoy the cleaning process benefits. We don’t mean you avoid being thorough; however, don’t overthink the cleaning process. You also want to enjoy the process and not stress about it.

    6. Rinse with water then let the rig dry

    Once you are done soaking your device, ensure you use water to rinse out the solution for at least two minutes. Rinsing out your piece helps in removing any particulate that is remaining on the rig. Water also gets rid of all the alcohol.

    It’s vital you thoroughly rinse your piece with water to avoid inhaling alcohol fumes. These fumes are dangerous to your health, and the last thing we want is for you to fall ill when enjoying a dabbing session.

    Once you finish rinsing your nectar collector dab kit, let it dry out. Allowing your piece to dry is vital since water can damage your nectar if you smoke when there’s some water in the chamber. Water can also harm you when it’s not dried off completely.

    7. Put your equipment back together

    Now that your nectar collector is all clean and dry, it’s time to put it back together and enjoy your dabbing sessions.

    8. Cleaning your nectar collector nails

    Remember, we said that the steps of cleaning the nail are different from the other pieces. How you clean your nail depends on the it’s type. If your nectar collector has a titanium tip, your cleaning options are very minimal since most cleaning solutions break down the outer coating that protects the titanium tip. 

    Titanium tips, therefore, force you to use cleaning ways that are more natural or you burn them clean. If your nectar collector has ceramic or quartz tips, cleaning solutions will work just fine on them. 

    How Often Should We Clean the Silicone Nectar Collector? 

    You should try to clean your nectar collector at least every 3 to 6 months to prevent mold spores and bacteria from growing. Cleaning your nectar collector also contributes to its durability, and the cleaner your dab straw is, the longer it will last. 

      That’s it -The process of cleaning a nectar collector. You can now go back to enjoy clean, dabbing sessions.

      More Articles

      1. How To Use A Nectar Collector?
      2. 12 Best Nectar Collectors in 2021
      3. How to Choose a Right Nectar Collector for Dabs?

      how to how to clean nectar collector silicone nectar collector

      ← Older Post Newer Post →

      Comments

      • This is the dumbest smoker ever dont do this isopropyl will melt your silicone!!!!!!!

        Nathaniel on
      • That is complicated and wastes the reclaim. Take the silicone pieces and put them in the freezer for a half hour or so and then just take them and roll and squeeze them and knock the frozen reclaim out into a dish. Repeat if necessary. Fastest and easiest way by far.

        Anthony Russell on

      Leave a comment

      Guides

      RSS
      Does Dry Herb Vaporizer Smell Linger?

      Does Dry Herb Vaporizer Smell Linger?

      By Joshua INHALCO

      Dry herb vaporizers have become a popular alternative to smoking, particularly for those who appreciate a more discreet and potentially healthier way to enjoy herbs....

      Read more
      How Big of a Torch Do You Need for Dabs

      How Big of a Torch Do You Need for Dabs?

      By Sharon Stone

      Dabbing has become one of the most popular methods of consuming cannabis concentrates due to its potency and fast-acting effects. However, achieving the perfect dab...

      Read more

      Related Products

       
      Glass Nectar Collector with Tree Perc - INHALCO
      Quick add
       
      Recycler Nectar Collector Titanium Tip - INHALCO
      Quick add
       
      Dab Straw With Water Filter - INHALCO
      Quick add
       
      Water Nectar Collector Dab Kit - INHALCO
      Quick add

      Related Articles

      How to Clean a Silicone Nectar Collector?
      Different Types of Nectar Collectors for Dabs
      How To Use A Nectar Collector
      How do You Smoke Wax